点击图片查看原图
| 滤料类型 | 果壳 | 适用对象 | 水 |
| 用途 | 水过滤 | 性能 | 耐酸、耐碱 |
| 类型 | 高效 | 品牌 | 星光 XG |
| 吸附率 | 99（％） | 抗压力 | 99（kgf） |
| 密度 | 1.5（g/cm3） | 孔隙率 | 99（%） |
| 磨损率 | 99 | 硬度 | 999 |
| 化学成分 | 99 | 盐酸可溶率 | 99（%） |
核桃壳
果壳滤料是采用山核桃壳为原料，经破碎、风旋、抛光、蒸洗、筛选加工而成，外观光泽，呈黄
褐色。耐磨抗压，吸附能力强，抗油浸，不结块，不腐烂等特点，适用于油田、钢铁、冶炼、环保化工含油污
水处理等行业的过滤装置。常用规格：0.5-0.8mm 0.8-1.2mm 1.2-1.6mm 1.6-2.0mm
一、[成孔材料]核桃壳粒
本厂采用国外先进的工艺、技术，专业生产陶瓷结合剂气孔砂轮成孔材料--核桃壳粒。该产品与以往的成孔材料
--精萘相比，具有气孔均匀、无气味、无污染，使用方便，价格便宜，对使用员工的身体无损还，安全。而且，对砂
轮气孔大小可以任意选择。因此，在国外60年代磨料磨具行业中已被广泛采用。
理化性能指标
堆积密度：16#--36# 0.850.05g/cm
46#--80# 0.800.05g/cm
粒度：16#--36# 16#筛上物为0，36#筛下物4%
46#--80# 46#筛上物为0，80#筛下物2%
色泽：黄棕色颗粒
产品规格:8#、10#、12#、14#、16#、20#、24#、30#、36#、46#、60#、80#、100#、120#
另外规格可按使用企业需求制作
二、[抛光材料]核桃壳
经特殊工艺加工而成的该类抛光材料，具有优良的耐磨性能，均匀的粒度，特高的壳含量。
理化性能指标
比重：1.28硬度：2.53.0MOH酸度:36PH
壳含量:90.90%仁含量：0.4%水份含量：8.7%
| 检测项目 | 测试数据 | 检测项目 | 测试 |
| 油去除率 | 90-95% | 反洗强度 | 25m3/m2.h |
| 悬浮物去除率 | 95-98% | 水冲洗压力 | 0.32MPa |
| 滤 速 | 20-25m/h | 维护方式 | 每年补充5－10％ |
| 比 重 | 1.5g/cm3 | 堆 密 度 | 0.8g/cm3 |
产品规格
5#5.004.00mm, 6#4.003.15mm, 8#2.802.36mm, 10# 2.001.80mm
12# 1.702.50mm, 14# 1.401.25mm, 16# 1.181.06mm, 20# 0.950.85mm
24#0.8000.630mm, 30#0.6000.560mm, 36#0.5300.450mm
46#0.4250.355mm, 60#0.3150.250mm, 80#0.2120.180mm
100# 0.1700.132mm, 120# 0.1250.100mm
三、[滤料]核桃壳
外观：光泽优美、呈褐色，采用优质山核桃壳为原料，经破碎、风旋、抛光、蒸洗、筛选等加工而成
特点：此滤料坚韧性大，耐磨抗压、吸附能力强、抗油浸、不结块、不腐烂
用途：它是多用于油田、冶炼、环保化工等行业含油污水处理的理想过滤材料理化性能指标
比重：1250kg/cm3容重: 800kg/cm3磨损率：1.5％
浮皮率：3％孔隙率：47除油率：65-95％
常用规格：0.5-1.0mm 0.5-0.8mm 0.6-1.2mm 0.8-1.6mm 1.0-2.0mm
Walnut (walnut grain production of walnut walnut liao walnut handicraft sandblasting walnut)
A hole material], [walnut grain
Our factory USES the overseas advanced technology, technical, professional production of cement blowholegrinding wheel - walnut grain materials into the hole. This product with previous hole
material -- fine naphthalene compares with uniform and porosity,Without odour, pollution-free, easy
to use, cheap price, on the use of physical condition, employee safety. And, to the grinding wheel
blowhole size can choose. Therefore, in the 1960s in foreign Abrasive materials has been extensively
applied in industry.Physical and chemical propertiesBulk density: 16 # # # 0.85-36 0.05 g/cm
46 # # # 0.80 0.05-80 cm/gGrain degrees: 16 # # # # # 16-36 for screen 0,36 # retained or 4%
46 # # # # # 46-80 screen for 0,80 # retained or 2%Lubricious ze: yellow brown granular
Product specification: 8 and 10 # # # # # # # 12, 14 and 16 # # 20, 30 # # #, 24, and
36 # # # # #, 60, 46, 100 # # #, 80, 120 #Also can use enterprise needsSecond,
[polishing materials] walnutThrough special process of these polishing materials, excellent
wear resistance, uniform particle size, high content of the shell.Physical and chemical
propertiesWeight: 1.28 hard than 2.5-3.0, MOH acid degrees: 3-6PH
Content: 90.90% kernel content shell, 0.4% water content: 8.7%
Product specifications
5 # 5.00-4.00 mm, # 6-8 mm 3.15 4.00-2.80 # # # 10 2.36 mm, 1.80 mm. -- 2.00
12 # 1.70, 14-2.50 mm mm, 16-125 malpede 1.18 # # 20 mm, 1.06-95-0.85 mm
0.800 # 24-30 mm, 0.630 0.600 # # # 36-0.560 mm, 0.530 -- their mm
0.425 # 46-0.355 mm, 60 # 0.315-0.250 mm, 80-0.180 mm 0.212 #
0.170 # 100-120, 0.132 mm 0.125 # -- 0.100 mm
Liao, [3] walnut
Appearance: luster beautiful, brown, adopts the high quality raw materials for walnut, the mountain
wind, crushing, screening and washing, polishing, steam and etcCharacteristics: this filter material
tenacity,wear-resisting compressive, adsorption ability strong, oil resistance, not agglomeration,
not decayUsage: it is used in oil, chemical industry, environmental protection, metallurgy oily
wastewater physico-chemical properties of the ideal filter materials1250kg/cm3 density proportion: 800kg/cm3: wear rate:than 1.5%FuPi rate: 3% porosity: 47 oil rate: 65-95Common specification:
0.5-0.5-0.8 mm mm 1.0 0.6-0.8-1.2 mm 1.6 mm 1.0-2.0 mm